Braithwaite N2 Manual (N2AA)
Replaced by the new Braithwaite N3 fusing press
|The N2 manual flat bed fusing press has been designed with versatility and ease of use very much in mind. Its large 120cm x 50cm heated top plate makes it suitable for use in the manufacture of many different types of garments & textiles. With a temperature range of up to 200oC, it can be used with a wide selection of today's modern fusible interlinings (& heat transfers etc.)|
|The simple to use control dials allow full and fine tuned control of the whole fusing process: Temperature is electronically controlled from 20oC right up to its maximum of 200oC, The timer can be set from 1 second through to 30 seconds and because the N2 features a unique front mounted, hand adjustable Pressure dial, it is possible to set different pressures without the need of any tools.|
N2 Manual (N2AA)
- 120 x 50cm Large Heated Area
- Dial Adjustable Pressure
- 20 to 200oC Temp Range
- 1 to 30secs Time Range
- Table Top Mounted
|The N2 fusing press has a wide opening top plate with spring lift assistance: which gives full access to the lower area for easy loading & unloading. |
The heated top plate is fitted with a removable Teflon coated heat resistant screen; which helps prevent the fabrics & interlining sticking to the press.
|Applications: 1) Fusing of interlinings etc.2) Heat transfer printing (t-shirt transfers etc).3) Heat apply of diamante stones & artwork etc.4) General flat bed Heat press. |
The N2 table top model is fitted with a standard 13amp plug. It does not need an air supply or any special installation work: so most customers can use it straight away. It only needs a plug socket and a sturdy table to mount it on.
|N2AA: Table top model with Electronic Temp & time controllers. N2AD: Table top model with advanced Self-tuning Electronic Temp controller.||N2AAS/N2ADS: As N2AA/N2AD but with added free standing work unit. N2T: Export model for use out side the UK/Europe.|